# Biological Entity Dictionary (BED): exploring and converting identifiers of biological entities such as genes, transcripts or peptides

# 1 Introduction

This Biological Entity Dictionary (BED) has been developed to address three main challenges. The first one is related to the completeness of identifier mappings. Indeed, direct mapping information provided by the different systems are not always complete and can be enriched by mappings provided by other resources. More interestingly, direct mappings not identified by any of these resources can be indirectly inferred by using mappings to a third reference. For example, many human Ensembl gene ID are not directly mapped to any Entrez gene ID but such mappings can be inferred using respective mappings to HGNC ID. The second challenge is related to the mapping of deprecated identifiers. Indeed, entity identifiers can change from one resource release to another. The identifier history is provided by some resources, such as Ensembl or the NCBI, but it is generally not used by mapping tools. The third challenge is related to the automation of the mapping process according to the relationships between the biological entities of interest. Indeed, mapping between gene and protein ID scopes should not be done the same way than between two scopes regarding gene ID. Also, converting identifiers from different organisms should be possible using gene orthologs information.

This document shows how to use the BED (Biological Entity Dictionary) R package to get and explore mapping between identifiers of biological entities (BE). This package provides a way to connect to a BED Neo4j database in which the relationships between the identifiers from different sources are recorded.

## 1.1 Citing BED

This package and the underlying research has been published in this peer reviewed article:

Patrice Godard and Jonathan van Eyll (2018). BED: a Biological Entity Dictionary based on a graph data model (version 3; peer review: 2 approved). F1000Research, 7:195.

## 1.2 Installation

### 1.2.1 Dependencies

This BED package depends on the following packages available in the CRAN repository:

- neo2R
- visNetwork
- dplyr
- readr
- stringr
- utils
- shiny
- DT
- miniUI
- rstudioapi

All these packages must be installed before installing BED.

### 1.2.2 Installation from github

    devtools::install_github("patzaw/BED")

### 1.2.3 Possible issue when updating from releases <= 1.3.0

If you get an error like the following…

    Error: package or namespace load failed for ‘BED’:
     .onLoad failed in loadNamespace() for 'BED', details:
      call: connections[[connection]][["cache"]]
      error: subscript out of bounds

… remove the BED folder located here:

    file.exists(file.path(Sys.getenv("HOME"), "R", "BED"))

## 1.3 Connection

Before using BED, the connection needs to be established with the underlying Neo4j DB. `url`, `username` and `password` should be adapted.

    library(BED)

    connectToBed(url="localhost:5454", remember=FALSE, useCache=FALSE)

The `remember` parameter can be set to `TRUE` in order to save connection information that will be automatically used the next time the `connectToBed()` function is called. By default, this parameter is set to `FALSE` to comply with CRAN policies. Saved connection can be managed with the `lsBedConnections()` and the `forgetBedConnection()` functions.

The `useCache` parameter is by default set to `FALSE` to comply with CRAN policies. However, it is recommended to set it to `TRUE` to improve the speed of recurrent queries: the results of some large queries are saved locally in a file.

The connection can be checked the following way.

    checkBedConn(verbose=TRUE)

    ## https://genodesy.org/BED

    ## BED

    ## Genodesy-Human

    ## 2025.06.02

    ## Cache ON

    ## [1] TRUE
    ## attr(,"dbVersion")
    ##   name       instance    version
    ## 1  BED Genodesy-Human 2025.06.02

If the `verbose` parameter is set to TRUE, the URL and the content version are displayed as messages.

The following function list saved connections.

    lsBedConnections()

The `connection` param of the `connectToBed` function can be used to connect to a saved connection other than the last one.

## 1.4 Data model

The BED underlying data model can be shown at any time using the following command.

    showBedDataModel()

## 1.5 Direct calls

Cypher queries can be run directly on the Neo4j database using the `cypher` function from the neo2R package through the `bedCall` function.

    results <- bedCall(
        cypher,
        query=prepCql(
           'MATCH (n:BEID)',
           'WHERE n.value IN $values',
           'RETURN DISTINCT n.value AS value, labels(n), n.database'
        ),
        parameters=list(values=c("10", "100"))
    )
    results

    ##   value      labels(n) n.database
    ## 1    10 BEID || GeneID EntrezGene
    ## 2   100 BEID || GeneID EntrezGene
    ## 3   100 BEID || GeneID       HGNC

## 1.6 Feeding the database

Many functions are provided within the package to build your own BED database instance. These functions are not exported in order to avoid their use when interacting with BED normally. Information about how to get an instance of the BED neo4j database is provided here:

- https://github.com/patzaw/BED#bed-database-instance-available-as-a-docker-image
- https://github.com/patzaw/BED#build-a-bed-database-instance

It can be adapted to user needs.

## 1.7 Caching

This part is relevant if the `useCache` parameter is set to TRUE when calling `connectToBed()`.

Functions of the BED package used to retrieve thousands of identifiers can take some time (generally a few seconds) before returning a result. Thus for this kind of query, the query is run for all the relevant ID in the DB and thanks to a cache system implemented in the package same queries with different filters should be much faster the following times.

By default the cache is flushed when the system detect inconsistencies with the BED database. However, it can also be manualy flushed if needed using the `clearBedCache()` function.

Queries already in cache can be listed using the `lsBedCache()` function which also return the occupied disk space.

# 2 Exploring available data

## 2.1 Biological entities

BED is organized around the central concept of Biological Entity (BE). All supported types of BE can be listed.

    listBe()

    ## [1] "Gene"       "Transcript" "Peptide"    "Object"

These BE are organized according to how they are related to each other. For example a Gene is_expressed_as a Transcript. This organization allows to find the first upstream BE common to a set of BE.

    firstCommonUpstreamBe(c("Object", "Transcript"))

    ## [1] "Gene"

    firstCommonUpstreamBe(c("Peptide", "Transcript"))

    ## [1] "Transcript"

## 2.2 Organisms

Several organims can be supported by the BED underlying database. They can be listed the following way.

    listOrganisms()

    ## [1] "Danio rerio"       "Homo sapiens"      "Sus scrofa"
    ## [4] "Mus musculus"      "Rattus norvegicus"

Common names are also supported and the corresponding taxonomic identifiers can be retrieved. Conversely the organism names corresponding to a taxonomic ID can be listed.

    getOrgNames(getTaxId("human"))

    ##   taxID                        name           nameClass
    ## 1  9606 Homo sapiens Linnaeus, 1758           authority
    ## 2  9606                       human genbank common name
    ## 3  9606                Homo sapiens     scientific name

## 2.3 Identifiers of biological entities

The main aim of BED is to allow the mapping of identifiers from different sources such as Ensembl or Entrez. Supported sources can be listed the following way for each supported organism.

    listBeIdSources(be="Transcript", organism="human")

    ##             database   nbBe   nbId         be
    ## 1 BEDTech_transcript 114516 114516 Transcript
    ## 2     Ens_transcript 410561 422449 Transcript
    ## 3             RefSeq 272423 280761 Transcript

The database gathering the largest number of BE of specific type can also be identified.

    largestBeSource(be="Transcript", organism="human", restricted=TRUE)

    ## [1] "Ens_transcript"

Finally, the `getAllBeIdSources()` function returns all the source databases of BE identifiers whatever the BE type.

## 2.4 Experimental platforms and probes

BED also supports experimental platforms and provides mapping betweens probes and BE identifiers (BEID).

The supported platforms can be listed the following way. The `getTargetedBe()` function returns the type of BE on which a specific platform focus.

    head(listPlatforms())

    ##              name                                        description focus
    ## GPL6101   GPL6101        Illumina ratRef-12 v1.0 expression beadchip  Gene
    ## GPL6887   GPL6887        Illumina MouseWG-6 v2.0 expression beadchip  Gene
    ## GPL6947   GPL6947       Illumina HumanHT-12 V3.0 expression beadchip  Gene
    ## GPL10558 GPL10558       Illumina HumanHT-12 V4.0 expression beadchip  Gene
    ## GPL1355   GPL1355     [Rat230_2] Affymetrix Rat Genome 230 2.0 Array  Gene
    ## GPL1261   GPL1261 [Mouse430_2] Affymetrix Mouse Genome 430 2.0 Array  Gene

    getTargetedBe("GPL570")

    ## [1] "Gene"

# 3 Managing identifiers

## 3.1 Retrieving all identifiers from a source

All identifiers of an organism BEs from one source can be retrieved.

    beids <- getBeIds(
        be="Gene", source="EntrezGene", organism="human",
        restricted=FALSE
    )
    dim(beids)

    ## [1] 216274      5

    head(beids)

    ##     id preferred   Gene db.version db.deprecated
    ## 1 4535     FALSE 930452   20250602         FALSE
    ## 2 4536     FALSE 930456   20250602         FALSE
    ## 3 4512     FALSE 930462   20250602         FALSE
    ## 4 4513     FALSE 930465   20250602         FALSE
    ## 5 4509     FALSE 930467   20250602         FALSE
    ## 6 4508     FALSE 930468   20250602         FALSE

The first column, id, corresponds to the identifiers of the BE in the source. The column named according to the BE type (in this case Gene) corresponds to the internal identifier of the related BE. BE CAREFUL, THIS INTERNAL ID IS NOT STABLE AND CANNOT BE USED AS A REFERENCE. This internal identifier is useful to identify BEIDS corresponding to the same BE. The following code can be used to have an overview of such redundancy.

    sort(table(table(beids$Gene)), decreasing = TRUE)

    ##
    ##      1      2      3      4      5      6      7      8      9     10     11
    ## 178247   9818   3179   1063    403    161     92     45     26     10     10
    ##     12     13     14     16     31
    ##      6      2      2      1      1

    ambId <- sum(table(table(beids$Gene)[which(table(beids$Gene)>=10)]))

In the example above we can see that most of Gene BE are identified by only one EntrezGene ID. However many of them are identified by two or more ID; 32 BE are even identified by 10 or more EntrezGeneID. In this case, most of these redundancies come from ID history extracted from Entrez. Legacy ID can be excluded from the retrieved ID by setting the `restricted` parameter to TRUE.

    beids <- getBeIds(
        be="Gene", source="EntrezGene", organism="human",
        restricted = TRUE
    )
    dim(beids)

    ## [1] 193477      5

The same code as above can be used to identify remaining redundancies.

    sort(table(table(beids$Gene)), decreasing = TRUE)

    ##
    ##      1      2      3      4
    ## 192681    361     22      2

In the example above we can see that allmost all Gene BE are identified by only one EntrezGene ID. However some of them are identified by two or more ID. This result comes from how the BED database is constructed according to the ID mapping provided by the different source databases. The graph below shows how the mapping was done for such a BE with redundant EntrezGene IDs.

This issue has been mainly solved by not taking into account ambigous mappings between NCBI Entrez gene identifiers and Ensembl gene identifier provided by Ensembl. It has been achieved using the `cleanDubiousXRef()` function from the 2019.10.11 version of the BED-UCB-Human database.

    eid <- beids$id[which(beids$Gene %in% names(which(table(beids$Gene)>=3)))][1]
    print(eid)

    ## [1] "284047"

    exploreBe(id=eid, source="EntrezGene", be="Gene") %>%
       visPhysics(solver="repulsion")

The way the ID correspondances are reported in the different source databases leads to this mapping ambiguity which has to be taken into account when comparing identifiers from different databases.

The `getBeIds()` returns other columns providing additional information about the id. The same function can be used to retrieved symbols or probe identifiers.

### 3.1.1 Preferred identifier

The BED database is constructed according to the relationships between identifiers provided by the different sources. Biological entities (BE) are identified as clusters of identifiers which correspond to each other directly or indirectly (`corresponds_to` relationship). Because of this design a BE can be identified by multiple identifiers (BEID) from the same database as shown above. These BEID are often related to alternate version of an entity.

For example, Ensembl provides different version (alternative sequences) of some chromosomes parts. And genes are also annotated on these alternative sequences. In Uniprot some unreviewed identifiers can correspond to reviewed proteins.

When available such kind of information is associated to an Attribute node through a `has` relationship providing the value of the attribute for the BEID. This information can also be used to define if a BEID is a preferred identifier for a BE.

The example below shows the case of the MAPT gene annotated on different version of human chromosome 17.

    mapt <- convBeIds(
       "MAPT", from="Gene", from.source="Symbol", from.org="human",
       to.source="Ens_gene", restricted=TRUE
    )
    exploreBe(
       mapt[1, "to"],
       source="Ens_gene",
       be="Gene"
    )

    getBeIds(
       be="Gene", source="Ens_gene", organism="human",
       restricted=TRUE,
       attributes=listDBAttributes("Ens_gene"),
       filter=mapt$to
    )

    ##                id preferred    Gene db.version db.deprecated
    ## 1 ENSG00000186868      TRUE 6797967        114         FALSE
    ## 2 ENSG00000276155     FALSE 6797967        114         FALSE
    ## 3 ENSG00000277956     FALSE 6797967        114         FALSE
    ## 4         LRG_660     FALSE 6797967        114         FALSE
    ##                       seq_region
    ## 1           GRCh38 chromosome 17
    ## 2 GRCh38 scaffold HSCHR17_1_CTG5
    ## 3 GRCh38 scaffold HSCHR17_2_CTG5
    ## 4                    lrg LRG_660

## 3.2 Checking identifiers

The origin of identifiers can be guessed as following.

    oriId <- c(
        "17237", "105886298", "76429", "80985", "230514", "66459",
        "93696", "72514", "20352", "13347", "100462961", "100043346",
        "12400", "106582", "19062", "245607", "79196", "16878", "320727",
        "230649", "66880", "66245", "103742", "320145", "140795"
    )
    idOrigin <- guessIdScope(oriId)
    print(idOrigin$be)

    ## [1] "Gene"

    print(idOrigin$source)

    ## [1] "EntrezGene"

    print(idOrigin$organism)

    ## [1] "Mus musculus"

The best guess is returned as a list but other possible origins are listed in the details attribute.

    print(attr(idOrigin, "details"))

    ##     be     source     organism nb proportion
    ## 1 Gene EntrezGene Mus musculus 25       1.00
    ## 2 Gene       HGNC Homo sapiens  3       0.12
    ## 3 Gene        MGI Mus musculus  2       0.08

If the origin of identifiers is already known, it can also be tested.

    checkBeIds(ids=oriId, be="Gene", source="EntrezGene", organism="mouse")

    checkBeIds(ids=oriId, be="Gene", source="HGNC", organism="human")

    ## Warning in checkBeIds(ids = oriId, be = "Gene", source = "HGNC", organism =
    ## "human"): Could not find 22 IDs among 25!

## 3.3 Identifier annotation

Identifiers can be annotated with symbols and names according to available information. The following code returns the most relevant symbol and the most relevant name for each ID. Source URL can also be generated with the `getBeIdURL()` function.

    toShow <- getBeIdDescription(
        ids=oriId, be="Gene", source="EntrezGene", organism="mouse"
    )
    toShow$id <- paste0(
        sprintf(
            '<a href="%s" target="_blank">',
            getBeIdURL(toShow$id, "EntrezGene")
        ),
        toShow$id,
        '<a>'
    )
    kable(toShow, escape=FALSE, row.names=FALSE)

id | symbol | name | preferred | db.version | db.deprecated
--- | --- | --- | --- | --- | ---
17237 | Mgrn1 | mahogunin, ring finger 1 | TRUE | 20250602 | FALSE
105886298 | Cmc4 | C-X9-C motif containing 4 | TRUE | 20250602 | FALSE
76429 | Lhpp | phospholysine phosphohistidine inorganic pyrophosphate phosphatase | TRUE | 20250602 | FALSE
80985 | Trim44 | tripartite motif-containing 44 | TRUE | 20250602 | FALSE
230514 | Leprot | leptin receptor overlapping transcript | TRUE | 20250602 | FALSE
66459 | Pyurf | Pigy upstream reading frame | TRUE | 20250602 | FALSE
93696 | Chrac1 | chromatin accessibility complex 1 | TRUE | 20250602 | FALSE
72514 | Fgfbp3 | fibroblast growth factor binding protein 3 | TRUE | 20250602 | FALSE
20352 | Sema4b | sema domain, immunoglobulin domain (Ig), transmembrane domain (TM) and short cytoplasmic domain, (semaphorin) 4B | TRUE | 20250602 | FALSE
13347 | Dffa | DNA fragmentation factor, alpha subunit | TRUE | 20250602 | FALSE
100462961 | Gm16149 | predicted gene 16149 | TRUE | 20250602 | FALSE
100043346 | Rpl10-ps3 | ribosomal protein L10, pseudogene 3 | TRUE | 20250602 | FALSE
12400 | Cbfb | core binding factor beta | TRUE | 20250602 | FALSE
106582 | Nrm | nurim (nuclear envelope membrane protein) | TRUE | 20250602 | FALSE
19062 | Inpp5k | inositol polyphosphate 5-phosphatase K | TRUE | 20250602 | FALSE
245607 | Gprasp2 | G protein-coupled receptor associated sorting protein 2 | TRUE | 20250602 | FALSE
79196 | Osbpl5 | oxysterol binding protein-like 5 | TRUE | 20250602 | FALSE
16878 | Lif | leukemia inhibitory factor | TRUE | 20250602 | FALSE
320727 | Ipo8 | importin 8 | TRUE | 20250602 | FALSE
230649 | Atpaf1 | ATP synthase mitochondrial F1 complex assembly factor 1 | TRUE | 20250602 | FALSE
66880 | Rsrc1 | arginine/serine-rich coiled-coil 1 | TRUE | 20250602 | FALSE
66245 | Hspbp1 | HSPA (heat shock 70kDa) binding protein, cytoplasmic cochaperone 1 | TRUE | 20250602 | FALSE
103742 | Mien1 | migration and invasion enhancer 1 | TRUE | 20250602 | FALSE
320145 | Sp8 | trans-acting transcription factor 8 | TRUE | 20250602 | FALSE
140795 | P2ry14 | purinergic receptor P2Y, G-protein coupled, 14 | TRUE | 20250602 | FALSE

All possible symbols and all possible names for each ID can also be retrieved using the following functions.

    res <- getBeIdSymbols(
        ids=oriId, be="Gene", source="EntrezGene", organism="mouse",
        restricted=FALSE
    )
    head(res)

    ##      id        symbol canonical direct preferred  entity
    ## 1 19062          SKIP     FALSE   TRUE      TRUE 3183601
    ## 2 19062           C62     FALSE   TRUE      TRUE 3183601
    ## 3 19062           Pps     FALSE   TRUE      TRUE 3183601
    ## 4 19062        Inpp5k      TRUE   TRUE      TRUE 3183601
    ## 5 72514       Fgf-bp3     FALSE   TRUE      TRUE 3208071
    ## 6 72514 2610306H15Rik     FALSE   TRUE      TRUE 3208071

    res <- getBeIdNames(
        ids=oriId, be="Gene", source="EntrezGene", organism="mouse",
        restricted=FALSE
    )
    head(res)

    ##      id                                                                   name
    ## 1 19062                                              putative PI-5-phosphatase
    ## 2 19062                                               PI-5-phosphatase related
    ## 3 19062               skeletal muscle and kidney-enriched inositol phosphatase
    ## 4 19062 skeletal muscle and kidney enriched inositol polyphosphate phosphatase
    ## 5 19062                    phosphatidylinositol-4,5-bisphosphate 5-phosphatase
    ## 6 19062                 phosphatidylinositol-3,4,5-trisphosphate 5-phosphatase
    ##   canonical direct preferred  entity
    ## 1     FALSE   TRUE      TRUE 3183601
    ## 2     FALSE   TRUE      TRUE 3183601
    ## 3     FALSE   TRUE      TRUE 3183601
    ## 4     FALSE   TRUE      TRUE 3183601
    ## 5     FALSE   TRUE      TRUE 3183601
    ## 6     FALSE   TRUE      TRUE 3183601

Also probes and some biological entities do not have directly associated symbols or names. These elements can also be annotated according to information related to relevant genes.

    someProbes <- c(
        "238834_at", "1569297_at", "213021_at", "225480_at",
        "216016_at", "35685_at", "217969_at", "211359_s_at"
    )
    toShow <- getGeneDescription(
        ids=someProbes, be="Probe", source="GPL570", organism="human"
    )
    kable(toShow, escape=FALSE, row.names=FALSE)

id | EntrezGene | symbol | name
--- | --- | --- | ---
238834_at | 91807 | MYLK3 | myosin light chain kinase 3
1569297_at | 731779 | LINC01300 | long intergenic non-protein coding RNA 1300
213021_at | 9527 | GOSR1 | golgi SNAP receptor complex member 1
225480_at | 127687 | C1orf122 | chromosome 1 open reading frame 122
216016_at | 114548 | NLRP3 | NLR family pyrin domain containing 3
35685_at | 6015 | RING1 | ring finger protein 1
217969_at | 738 | VPS51 | VPS51 subunit of GARP complex
211359_s_at | 4988 | OPRM1 | opioid receptor mu 1

## 3.4 Products of molecular biology processes

The BED data model has beeing built to fulfill molecular biology processes:

- is_expressed_as relationships correspond to the transcription process.
- is_translated_in relationships correspond to the translation process.
- codes_for is a fuzzy relationship allowing the mapping of genes on object not necessary corresonpding to the same kind of biological molecule.

These processes are described in different databases with different level of granularity. For exemple, Ensembl provides possible transcripts for each gene specifying which one of them is canonical.

The following functions are used to retrieve direct products or direct origins of molecular biology processes.

    getDirectProduct("ENSG00000145335", process="is_expressed_as")

    ##             origin  osource         product        psource canonical
    ## 1  ENSG00000145335 Ens_gene ENST00000611107 Ens_transcript     FALSE
    ## 2  ENSG00000145335 Ens_gene ENST00000508895 Ens_transcript     FALSE
    ## 3  ENSG00000145335 Ens_gene ENST00000674129 Ens_transcript     FALSE
    ## 4  ENSG00000145335 Ens_gene ENST00000673766 Ens_transcript     FALSE
    ## 5  ENSG00000145335 Ens_gene ENST00000505199 Ens_transcript     FALSE
    ## 6  ENSG00000145335 Ens_gene ENST00000673902 Ens_transcript     FALSE
    ## 7  ENSG00000145335 Ens_gene ENST00000506244 Ens_transcript     FALSE
    ## 8  ENSG00000145335 Ens_gene ENST00000502987 Ens_transcript     FALSE
    ## 9  ENSG00000145335 Ens_gene ENST00000394986 Ens_transcript     FALSE
    ## 10 ENSG00000145335 Ens_gene ENST00000345009 Ens_transcript     FALSE
    ## 11 ENSG00000145335 Ens_gene ENST00000618500 Ens_transcript     FALSE
    ## 12 ENSG00000145335 Ens_gene ENST00000506691 Ens_transcript     FALSE
    ## 13 ENSG00000145335 Ens_gene ENST00000420646 Ens_transcript     FALSE
    ## 14 ENSG00000145335 Ens_gene ENST00000673718 Ens_transcript     FALSE
    ## 15 ENSG00000145335 Ens_gene ENST00000394989 Ens_transcript     FALSE
    ## 16 ENSG00000145335 Ens_gene ENST00000336904 Ens_transcript     FALSE
    ## 17 ENSG00000145335 Ens_gene ENST00000394991 Ens_transcript      TRUE

    getDirectProduct("ENST00000336904", process="is_translated_in")

    ##            origin        osource         product         psource canonical
    ## 1 ENST00000336904 Ens_transcript ENSP00000338345 Ens_translation      TRUE

    getDirectOrigin("NM_001146055", process="is_expressed_as")

    ##   origin    osource      product psource canonical
    ## 1   6622 EntrezGene NM_001146055  RefSeq     FALSE

# 4 Converting identifiers

## 4.1 Same entity and same organism: from one source to another

    res <- convBeIds(
        ids=oriId,
        from="Gene",
        from.source="EntrezGene",
        from.org="mouse",
        to.source="Ens_gene",
        restricted=TRUE,
        prefFilter=TRUE
    )
    head(res)

    ##        from                 to to.preferred to.entity
    ## 1     19062 ENSMUSG00000006127         TRUE   3183601
    ## 2    103742 ENSMUSG00000002580         TRUE   3185598
    ## 3    320145 ENSMUSG00000048562         TRUE   3186976
    ## 4 105886298 ENSMUSG00000090110         TRUE   3190218
    ## 5    320727 ENSMUSG00000040029         TRUE   3191205
    ## 6     17237 ENSMUSG00000022517         TRUE   3192353

## 4.2 Same organism: from one entity to another

    res <- convBeIds(
        ids=oriId,
        from="Gene",
        from.source="EntrezGene",
        from.org="mouse",
        to="Peptide",
        to.source="Ens_translation",
        restricted=TRUE,
        prefFilter=TRUE
    )
    head(res)

    ##         from                 to to.preferred to.entity
    ## 1      19062 ENSMUSP00000119996         TRUE   4511949
    ## 2      19062 ENSMUSP00000121060         TRUE   4511955
    ## 3     320145 ENSMUSP00000152523         TRUE   4516342
    ## 4  105886298 ENSMUSP00000033543         TRUE   4520648
    ## 10 105886298 ENSMUSP00000112753         TRUE   4520648
    ## 7  105886298 ENSMUSP00000117381         TRUE   4520648

## 4.3 From one organism to another

    res <- convBeIds(
        ids=oriId,
        from="Gene",
        from.source="EntrezGene",
        from.org="mouse",
        to="Peptide",
        to.source="Ens_translation",
        to.org="human",
        restricted=TRUE,
        prefFilter=TRUE
    )
    head(res)

    ##     from              to to.preferred to.entity
    ## 53 66245 ENSP00000466569         TRUE   2770852
    ## 54 66245 ENSP00000466749         TRUE   2770854
    ## 55 66245 ENSP00000465876         TRUE   2770861
    ## 56 66245 ENSP00000465690         TRUE   2770864
    ## 57 66245 ENSP00000468403         TRUE   2770868
    ## 58 66245 ENSP00000467926         TRUE   2770877

## 4.4 Converting lists of identifiers

List of identifiers can be converted the following way. Only converted IDs are returned in this case.

    humanEnsPeptides <- convBeIdLists(
        idList=list(a=oriId[1:5], b=oriId[-c(1:5)]),
        from="Gene",
        from.source="EntrezGene",
        from.org="mouse",
        to="Peptide",
        to.source="Ens_translation",
        to.org="human",
        restricted=TRUE,
        prefFilter=TRUE
    )
    unlist(lapply(humanEnsPeptides, length))

    ##   a   b
    ##  21 117

    lapply(humanEnsPeptides, head)

    ## $a
    ## [1] "ENSP00000497944" "ENSP00000497385" "ENSP00000497374" "ENSP00000483521"
    ## [5] "ENSP00000468171" "ENSP00000443810"
    ##
    ## $b
    ## [1] "ENSP00000466569" "ENSP00000466749" "ENSP00000465876" "ENSP00000465690"
    ## [5] "ENSP00000468403" "ENSP00000467926"

### 4.4.1 BEIDList

`BEIDList` objects are used to manage lists of BEID with an attached explicit scope, and metadata provided in a data frame. The `focusOnScope()` function is used to easily convert such object to another scope. For example, in the code below, Entrez gene identifiers are converted in Ensembl identifiers.

    entrezGenes <- BEIDList(
       list(a=oriId[1:5], b=oriId[-c(1:5)]),
       scope=list(be="Gene", source="EntrezGene", organism="Mus musculus"),
       metadata=data.frame(
          .lname=c("a", "b"),
          description=c("Identifiers in a", "Identifiers in b"),
          stringsAsFactors=FALSE
       )
    )
    entrezGenes

    ## BEIDList of 2 elements gathering 25 BEIDs in total
    ##    - Scope: be="Gene", source="EntrezGene", organism="Mus musculus"
    ##    - Metadata fields: ".lname", "description"

    entrezGenes$a

    ## [1] "17237"     "105886298" "76429"     "80985"     "230514"

    ensemblGenes <- focusOnScope(entrezGenes, source="Ens_gene")
    ensemblGenes$a

    ## [1] "ENSMUSG00000090110" "ENSMUSG00000022517" "ENSMUSG00000035212"
    ## [4] "ENSMUSG00000030946" "ENSMUSG00000027189"

## 4.5 Converting data frames

IDs in data frames can also be converted.

    toConv <- data.frame(a=1:25, b=runif(25))
    rownames(toConv) <- oriId
    res <- convDfBeIds(
        df=toConv,
        from="Gene",
        from.source="EntrezGene",
        from.org="mouse",
        to.source="Ens_gene",
        restricted=TRUE,
        prefFilter=TRUE
    )
    head(res)

    ##   a          b conv.from            conv.to
    ## 1 1 0.83468236     17237 ENSMUSG00000022517
    ## 2 2 0.97952719 105886298 ENSMUSG00000090110
    ## 3 3 0.50396818     76429 ENSMUSG00000030946
    ## 4 4 0.23289780     80985 ENSMUSG00000027189
    ## 5 5 0.50167445    230514 ENSMUSG00000035212
    ## 6 6 0.02989927     66459 ENSMUSG00000043162

## 4.6 Explore convertion shortest path between two identifiers

Because the conversion process takes into account several resources, it might be useful to explore the path between two identifiers which have been mapped. This can be achieved by the `exploreConvPath` function.

    from.id <- "ILMN_1220595"
    res <- convBeIds(
       ids=from.id, from="Probe", from.source="GPL6885", from.org="mouse",
       to="Peptide", to.source="Uniprot", to.org="human",
       prefFilter=TRUE
    )
    res

    ##           from     to to.preferred to.entity
    ## 1 ILMN_1220595 Q16552         TRUE  10060134

    exploreConvPath(
       from.id=from.id, from="Probe", from.source="GPL6885",
       to.id=res$to[1], to="Peptide", to.source="Uniprot"
    )

The figure above shows how the ILMN_1220595 ProbeID, targeting the mouse NM_010552 transcript, can be associated to the Q16552 human protein ID in Uniprot.

## 4.7 Notes about converting from and to gene symbols

Canonical and non-canonical symbols are associated to genes. In some cases the same symbol (canonical or not) can be associated to several genes. This can lead to ambiguous mapping. The strategy to apply for such mapping depends on the aim of the user and his knowledge about the origin of the symbols to consider.

The complete mapping between Ensembl gene identifiers and symbols is retrieved by using the `getBeIDSymbolTable` function.

    compMap <- getBeIdSymbolTable(
       be="Gene", source="Ens_gene", organism="rat",
       restricted=FALSE
    )
    dim(compMap)

    ## [1] 196051      6

    head(compMap)

    ##                   id       symbol canonical direct preferred  entity
    ## 1 ENSRNOG00000006806       Setmar      TRUE   TRUE      TRUE 4763957
    ## 2 ENSRNOG00000087381     SNORD115      TRUE   TRUE      TRUE 9142981
    ## 3 ENSRNOG00000071792     SNORD116      TRUE   TRUE      TRUE 9143066
    ## 4 ENSRNOG00000088469     SNORD116      TRUE   TRUE      TRUE 9143145
    ## 5 ENSRNOG00000079380      5S_rRNA      TRUE   TRUE      TRUE 9139361
    ## 6 ENSRNOG00000004107 LOC134480573      TRUE   TRUE      TRUE 9138579

The canonical field indicates if the symbol is canonical for the identifier. The direct field indicates if the symbol is directly associated to the identifier or indirectly through a relationship with another identifier.

As an example, let’s consider the “Snca” symbol in rat. As shown below, this symbol is associated to 2 genes; it is canonical for one gene and not for another. These 2 genes are also associated to other symbols.

    sncaEid <- compMap[which(compMap$symbol=="Snca"),]
    sncaEid

    ##                       id symbol canonical direct preferred  entity
    ## 18734 ENSRNOG00000029408   Snca     FALSE   TRUE      TRUE 4801170
    ## 52582 ENSRNOG00000008656   Snca      TRUE   TRUE      TRUE 4770695

    compMap[which(compMap$id %in% sncaEid$id),]

    ##                       id    symbol canonical direct preferred  entity
    ## 18733 ENSRNOG00000029408 LOC317274     FALSE   TRUE      TRUE 4801170
    ## 18734 ENSRNOG00000029408      Snca     FALSE   TRUE      TRUE 4801170
    ## 18735 ENSRNOG00000029408   Mageb16      TRUE   TRUE      TRUE 4801170
    ## 52581 ENSRNOG00000008656 MGC105443     FALSE   TRUE      TRUE 4770695
    ## 52582 ENSRNOG00000008656      Snca      TRUE   TRUE      TRUE 4770695

The `getBeIdDescription` function described before, reports only one symbol for each identifier. Canonical and direct symbols are prioritized.

    getBeIdDescription(
       sncaEid$id,
       be="Gene", source="Ens_gene", organism="rat"
    )

    ##                                    id  symbol                   name preferred
    ## ENSRNOG00000029408 ENSRNOG00000029408 Mageb16 MAGE family member B16      TRUE
    ## ENSRNOG00000008656 ENSRNOG00000008656    Snca        synuclein alpha      TRUE
    ##                    db.version db.deprecated
    ## ENSRNOG00000029408        114         FALSE
    ## ENSRNOG00000008656        114         FALSE

The `convBeIds` works differently in order to provide a mapping as exhaustive as possible. If a symbol is associated to several input identifiers, non-canonical associations with this symbol are removed if a canonical association exists for any other identifier. This can lead to inconsistent results, depending on the user input, as show below.

    convBeIds(
       sncaEid$id[1],
       from="Gene", from.source="Ens_gene", from.org="rat",
       to.source="Symbol"
    )

    ##                 from        to to.preferred to.entity
    ## 3 ENSRNOG00000029408 LOC317274           NA   4801170
    ## 2 ENSRNOG00000029408   Mageb16           NA   4801170
    ## 1 ENSRNOG00000029408      Snca           NA   4801170

    convBeIds(
       sncaEid$id[2],
       from="Gene", from.source="Ens_gene", from.org="rat",
       to.source="Symbol"
    )

    ##                 from        to to.preferred to.entity
    ## 2 ENSRNOG00000008656 MGC105443           NA   4770695
    ## 1 ENSRNOG00000008656      Snca           NA   4770695

    convBeIds(
       sncaEid$id,
       from="Gene", from.source="Ens_gene", from.org="rat",
       to.source="Symbol"
    )

    ##                 from        to to.preferred to.entity
    ## 2 ENSRNOG00000008656 MGC105443           NA   4770695
    ## 1 ENSRNOG00000008656      Snca           NA   4770695
    ## 5 ENSRNOG00000029408 LOC317274           NA   4801170
    ## 4 ENSRNOG00000029408   Mageb16           NA   4801170

In the example above, when the query is run for each identifier independently, the association to the “Snca” symbol is reported for both. However, when running the same query with the 2 identifiers at the same time, the “Snca” symbol is reported only for one gene corresponding to the canonical association. An additional filter can be used to only keep canonical symbols:

    convBeIds(
       sncaEid$id,
       from="Gene", from.source="Ens_gene", from.org="rat",
       to.source="Symbol",
       canonical=TRUE
    )

    ##                 from      to to.preferred to.entity
    ## 1 ENSRNOG00000008656    Snca           NA   4770695
    ## 2 ENSRNOG00000029408 Mageb16           NA   4801170

Finally, as shown below, when running the query the other way, “Snca” is only associated to the gene for which it is the canonical symbol.

    convBeIds(
       "Snca",
       from="Gene", from.source="Symbol", from.org="rat",
       to.source="Ens_gene"
    )

    ##   from                 to to.preferred to.entity
    ## 1 Snca ENSRNOG00000008656         TRUE   4770695

Therefore, the user should chose the function to use with care when needing to convert from or to gene symbol.

# 5 An interactive dictionary: Shiny module

IDs, symbols and names can be seeked without knowing the original biological entity or probe. Then the results can be converted to the context of interest.

    searched <- searchBeid("sv2A")
    toTake <- which(searched$organism=="Homo sapiens")[1]
    relIds <- geneIDsToAllScopes(
      geneids=searched$GeneID[toTake],
      source=searched$Gene_source[toTake],
      organism=searched$organism[toTake]
    )

A Shiny gadget integrating these two function has been developped and is also available as an Rstudio addins.

    relIds <- findBeids()

It relies on a Shiny module (`beidsServer()` and `beidsUI()` functions) made to facilitate the development of applications focused on biological entity related information. The code below shows a minimum example of such an application.

    library(shiny)
    library(BED)
    library(DT)

    ui <- fluidPage(
       beidsUI("be"),
       fluidRow(
          column(
             12,
             tags$br(),
             h3("Selected gene entities"),
             DTOutput("result")
          )
       )
    )

    server <- function(input, output){
        found <- beidsServer("be", toGene=TRUE, multiple=TRUE, tableHeight=250)
        output$result <- renderDT({
           req(found())
           toRet <- found()
           datatable(toRet, rownames=FALSE)
        })
    }

    shinyApp(ui = ui, server = server)

# 6 Session info

    ## R version 4.4.1 (2024-06-14)
    ## Platform: x86_64-pc-linux-gnu
    ## Running under: Ubuntu 22.04.5 LTS
    ##
    ## Matrix products: default
    ## BLAS:   /usr/lib/x86_64-linux-gnu/openblas-pthread/libblas.so.3
    ## LAPACK: /usr/lib/x86_64-linux-gnu/openblas-pthread/libopenblasp-r0.3.20.so;  LAPACK version 3.10.0
    ##
    ## locale:
    ##  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C
    ##  [3] LC_TIME=en_US.UTF-8        LC_COLLATE=C
    ##  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8
    ##  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C
    ##  [9] LC_ADDRESS=C               LC_TELEPHONE=C
    ## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
    ##
    ## time zone: Europe/Rome
    ## tzcode source: system (glibc)
    ##
    ## attached base packages:
    ## [1] stats     graphics  grDevices utils     datasets  methods   base
    ##
    ## other attached packages:
    ## [1] BED_1.6.2        visNetwork_2.1.2 neo2R_2.4.2      knitr_1.50
    ##
    ## loaded via a namespace (and not attached):
    ##  [1] miniUI_0.1.2      jsonlite_2.0.0    dplyr_1.1.4       compiler_4.4.1
    ##  [5] promises_1.3.3    tidyselect_1.2.1  Rcpp_1.0.14       stringr_1.5.1
    ##  [9] later_1.4.2       jquerylib_0.1.4   yaml_2.3.10       fastmap_1.2.0
    ## [13] mime_0.13         R6_2.6.1          generics_0.1.4    curl_6.2.3
    ## [17] htmlwidgets_1.6.4 tibble_3.2.1      shiny_1.10.0      bslib_0.9.0
    ## [21] pillar_1.10.2     rlang_1.1.6       DT_0.33           cachem_1.1.0
    ## [25] stringi_1.8.7     httpuv_1.6.16     xfun_0.52         sass_0.4.10
    ## [29] cli_3.6.5         withr_3.0.2       magrittr_2.0.3    digest_0.6.37
    ## [33] rstudioapi_0.17.1 xtable_1.8-4      base64enc_0.1-3   lifecycle_1.0.4
    ## [37] vctrs_0.6.5       evaluate_1.0.3    glue_1.8.0        httr_1.4.7
    ## [41] rmarkdown_2.29    tools_4.4.1       pkgconfig_2.0.3   htmltools_0.5.8.1